small, compact and easy to use
The A90 C system is the right choice for providing material via standard Semco or Euro cartridges, depending on the cartridge size.
The system works with compressed air, which pushes the cartridge trigger and feeds the material from the cartridge to the dispenser. At the same time, the piston of the pneumatic cylinder moves the cartridge trigger over the surface of the workpiece, ensuring smooth dispensing of the material. The various colored LEDs notify the operator when the cartridge fill level drops below a defined minimum value (< 30 mm). The operator can also look through a small viewing window to check whether the system even contains a cartridge. For operating convenience, the cartridge in this material feeding system is easy to replace. This is a reliable, trouble-free material preparation system available at an affordable price.
Your Benefits
- Space-saving design
- Easy to use
- Interference-free feeding of even small quantities
- Suitable for the assembly to portal axles
A90 CV: Material Feed with Vacuum Docking
Apart from the conventional functions, this model of the A90 C also features the new vacuum docking function. It enables the automated ventilation during cartridge changes and thus an absolutely bubble-free docking process between the material cartridge and the dispensing system. With it, the material waste per cartridge change can be reduced by up to 90 percent. Users not only benefit from absolute process reliability but also from considerable cost savings - especially in the case of expensive dispensing media.
For the vacuum docking process, Scheugenpflug specifically designed an innovative docking sleeve with filter insert. The sleeve is manually put on the filled material cartridge, which is inserted into the cartridge mount of the A90 CV afterwards. The ejector of the cartridge expulsion unit then evacuates the air within the docking sleeve. The integrated filter prevents the introduction of dispensing material into the ejector line.
Quick overview
++ = very good + = good (+) = limited − = not recommended
Variants of material feeding units
Models for Semco cartridges
| Model | Semco 6 oz1 | Semco 12 oz1 | Semco 20 oz1 | Semco 32 oz1 |
|---|---|---|---|---|
| in ml | 170 | 340 | 610 | 950 |
| Weight (kg) | 1,85 | 2,05 | 2,28 | 2,49 |
| Max. height (mm) | 469 | 734 | 594 | 795 |
| Max. diameter (mm) | 83 | 83 | 99 | 99 |
1oz = UK, liquid
Please contact us for further measurements.
Video of operating principle
Up to 90 Percent Less Material Waste per Cartridge Change.
For dispensing applications with high viscosity materials and low media consumption, Scheugenpflug enhanced their proven material feeding unit A90 C: The new A90 CV not only ensures a process reliable and failure-free feed of potting material from the cartridge to the dispenser.
